XML Schema "geometryBasic2d.xsd"
Target Namespace:
Version:
3.2.1.2
Defined Components:
elements (7 global), complexTypes (8)
Default Namespace-Qualified Form:
Local Elements: qualified; Local Attributes: unqualified
Schema Location:
http://schemas.opengis.net/gml/3.2.1/geometryBasic2d.xsd; see XML source
Includes Schemas (2):
Included in Schemas (1):
Annotation
See ISO/DIS 19136 Clause 10. GML is an OGC Standard. Copyright (c) 2007,2010 Open Geospatial Consortium. To obtain additional rights of use, visit http://www.opengeospatial.org/legal/ .
All Element Summary
An abstraction of a ring to support surface boundaries of different complexity.
Type:
Content:
empty
Abstract:
(may not be used directly in instance XML documents)
Subst.Gr:
affiliated to substitution group gml:AbstractObject; may be substituted with 2 elements
Defined:
globally; see XML source
Used:
The AbstractSurface element is the abstract head of the substitution group for all (continuous) surface elements.
Type:
Content:
complex, 5 attributes, 5 elements
Abstract:
(may not be used directly in instance XML documents)
Subst.Gr:
affiliated to substitution group gml:AbstractGeometricPrimitive; may be substituted with 7 elements
Defined:
globally; see XML source
Used:
A boundary of a surface consists of a number of rings.
Type:
Content:
complex, 1 element
Defined:
globally; see XML source
Used:
A boundary of a surface consists of a number of rings.
Type:
Content:
complex, 1 element
Defined:
globally; see XML source
Used:
A LinearRing is defined by four or more coordinate tuples, with linear interpolation between them; the first and last coordinates shall be coincident.
Type:
Content:
complex, 5 elements
Subst.Gr:
may substitute for elements: gml:AbstractRing, gml:AbstractObject
Defined:
globally; see XML source
Used:
A Polygon is a special surface that is defined by a single surface patch (see D.3.6).
Type:
Content:
complex, 5 attributes, 7 elements
Subst.Gr:
Defined:
globally; see XML source
Used:
never
This property element either references a surface via the XLink-attributes or contains the surface element. surfaceProperty is the predefined property which may be used by GML Application Schemas whenever a GML feature has a property with a value that is substitutable for AbstractSurface.
Type:
Content:
complex, 10 attributes, 1 element
Defined:
globally; see XML source
Used:
Complex Type Summary
A property with the content model of gml:AbstractRingPropertyType encapsulates a ring to represent the surface boundary property of a surface.
Content:
complex, 1 element
Defined:
globally; see XML source
Includes:
definition of 1 element
Used:
Content:
empty
Abstract:
(cannot be assigned directly to elements used in instance XML documents)
Defined:
globally; see XML source
Used:
gml:AbstractSurfaceType is an abstraction of a surface to support the different levels of complexity.
Content:
complex, 5 attributes, 5 elements
Abstract:
(cannot be assigned directly to elements used in instance XML documents)
Defined:
globally; see XML source
Used:
A property with the content model of gml:LinearRingPropertyType encapsulates a linear ring to represent a component of a surface boundary.
Content:
complex, 1 element
Defined:
globally; see XML source
Includes:
definition of 1 element
Used:
never
Content:
complex, 5 elements
Defined:
globally; see XML source
Includes:
definitions of 5 elements
Used:
Content:
complex, 5 attributes, 7 elements
Defined:
globally; see XML source
Includes:
definitions of 2 elements
Used:
gml:SurfaceArrayPropertyType is a container for an array of surfaces.
Content:
complex, 1 attribute, 1 element
Defined:
globally; see XML source
Includes:
definition of 1 element
Used:
A property that has a surface as its value domain may either be an appropriate geometry element encapsulated in an element of this type or an XLink reference to a remote geometry element (where remote includes geometry elements located elsewhere in the same document).
Content:
complex, 10 attributes, 1 element
Defined:
globally; see XML source
Includes:
definition of 1 element
Used:
XML Source
<?xml version="1.0" encoding="UTF-8"?>
<schema elementFormDefault="qualified" targetNamespace="http://www.opengis.net/gml/3.2" version="3.2.1.2" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:gml="http://www.opengis.net/gml/3.2" xmlns:xlink="http://www.w3.org/1999/xlink">
<annotation>
<appinfo source="urn:x-ogc:specification:gml:schema-xsd:geometryBasic2d:3.2.1">geometryBasic2d.xsd</appinfo>
<documentation>
See ISO/DIS 19136 Clause 10.

GML is an OGC Standard.
Copyright (c) 2007,2010 Open Geospatial Consortium.
To obtain additional rights of use, visit http://www.opengeospatial.org/legal/ .
</documentation>
</annotation>
<include schemaLocation="gml.xsd"/>
<include schemaLocation="geometryBasic0d1d.xsd"/>
<complexType abstract="true" name="AbstractSurfaceType">
<annotation>
<documentation>
gml:AbstractSurfaceType is an abstraction of a surface to support the different levels of complexity. A surface is always a continuous region of a plane.
</documentation>
</annotation>
<complexContent>
</complexContent>
</complexType>
<element abstract="true" name="AbstractSurface" substitutionGroup="gml:AbstractGeometricPrimitive" type="gml:AbstractSurfaceType">
<annotation>
<documentation>
The AbstractSurface element is the abstract head of the substitution group for all (continuous) surface elements.
</documentation>
</annotation>
</element>
<complexType name="SurfacePropertyType">
<annotation>
<documentation>
A property that has a surface as its value domain may either be an appropriate geometry element encapsulated in an element of this type or an XLink reference to a remote geometry element (where remote includes geometry elements located elsewhere in the same document). Either the reference or the contained element shall be given, but neither both nor none.
</documentation>
</annotation>
<sequence minOccurs="0">
<element ref="gml:AbstractSurface"/>
</sequence>
<attributeGroup ref="gml:AssociationAttributeGroup"/>
<attributeGroup ref="gml:OwnershipAttributeGroup"/>
</complexType>
<annotation>
<documentation>
This property element either references a surface via the XLink-attributes or contains the surface element. surfaceProperty is the predefined property which may be used by GML Application Schemas whenever a GML feature has a property with a value that is substitutable for AbstractSurface.
</documentation>
</annotation>
</element>
<complexType name="SurfaceArrayPropertyType">
<annotation>
<documentation>
gml:SurfaceArrayPropertyType is a container for an array of surfaces. The elements are always contained in the array property, referencing geometry elements or arrays of geometry elements via XLinks is not supported.
</documentation>
</annotation>
<sequence maxOccurs="unbounded" minOccurs="0">
<element ref="gml:AbstractSurface"/>
</sequence>
<attributeGroup ref="gml:OwnershipAttributeGroup"/>
</complexType>
<complexType name="PolygonType">
<complexContent>
<extension base="gml:AbstractSurfaceType">
<sequence>
<element minOccurs="0" ref="gml:exterior"/>
<element maxOccurs="unbounded" minOccurs="0" ref="gml:interior"/>
</sequence>
</extension>
</complexContent>
</complexType>
<element name="Polygon" substitutionGroup="gml:AbstractSurface" type="gml:PolygonType">
<annotation>
<documentation>
A Polygon is a special surface that is defined by a single surface patch (see D.3.6). The boundary of this patch is coplanar and the polygon uses planar interpolation in its interior.
The elements exterior and interior describe the surface boundary of the polygon.
</documentation>
</annotation>
</element>
<element name="exterior" type="gml:AbstractRingPropertyType">
<annotation>
<documentation>
A boundary of a surface consists of a number of rings. In the normal 2D case, one of these rings is distinguished as being the exterior boundary. In a general manifold this is not always possible, in which case all boundaries shall be listed as interior boundaries, and the exterior will be empty.
</documentation>
</annotation>
</element>
<element name="interior" type="gml:AbstractRingPropertyType">
<annotation>
<documentation>
A boundary of a surface consists of a number of rings. The "interior" rings separate the surface / surface patch from the area enclosed by the rings.
</documentation>
</annotation>
</element>
<complexType abstract="true" name="AbstractRingType">
<sequence/>
</complexType>
<element abstract="true" name="AbstractRing" substitutionGroup="gml:AbstractObject" type="gml:AbstractRingType">
<annotation>
<documentation>
An abstraction of a ring to support surface boundaries of different complexity.
The AbstractRing element is the abstract head of the substituition group for all closed boundaries of a surface patch.
</documentation>
</annotation>
</element>
<complexType name="AbstractRingPropertyType">
<annotation>
<documentation>
A property with the content model of gml:AbstractRingPropertyType encapsulates a ring to represent the surface boundary property of a surface.
</documentation>
</annotation>
<sequence>
<element ref="gml:AbstractRing"/>
</sequence>
</complexType>
<complexType name="LinearRingType">
<complexContent>
<extension base="gml:AbstractRingType">
<sequence>
<choice>
<choice maxOccurs="unbounded" minOccurs="4">
<element ref="gml:pos"/>
<element ref="gml:pointProperty"/>
<element ref="gml:pointRep"/>
</choice>
<element ref="gml:posList"/>
<element ref="gml:coordinates"/>
</choice>
</sequence>
</extension>
</complexContent>
</complexType>
<element name="LinearRing" substitutionGroup="gml:AbstractRing" type="gml:LinearRingType">
<annotation>
<documentation>
A LinearRing is defined by four or more coordinate tuples, with linear interpolation between them; the first and last coordinates shall be coincident. The number of direct positions in the list shall be at least four.
</documentation>
</annotation>
</element>
<complexType name="LinearRingPropertyType">
<annotation>
<documentation>
A property with the content model of gml:LinearRingPropertyType encapsulates a linear ring to represent a component of a surface boundary.
</documentation>
</annotation>
<sequence>
<element ref="gml:LinearRing"/>
</sequence>
</complexType>
</schema>

This XML schema documentation has been generated with DocFlex/XML 1.11 using DocFlex/XML XSDDoc 2.8.3 template set.
DocFlex/XML is a tool for programming and running highly sophisticated documentation and reports generators by the data obtained from any kind of XML files. The actual doc-generators are implemented in the form of special templates that are designed visually using a high-quality Template Designer GUI basing on the XML schema (or DTD) files describing the data source XML.
DocFlex/XML XSDDoc is a commercial template application of DocFlex/XML that implements a high-quality XML Schema documentation generator with simultaneous support of framed multi-file HTML, single-file HTML and RTF output formats. (More formats are planned in the future).
A commercial license for "DocFlex/XML XSDDoc" will allow you:
  • To configure the generated documentation so much as you want. Thanks to our template technology, it was possible to support > 400 template parameters, which work the same as "options" of ordinary doc-generators. The parameters are organized in nested groups, which form a parameter tree. Most of them have their default values calculated dynamically from a few primary parameters. So, you'll never need to specify all of them. That will give you swift and effective control over the generated content!
  • To use certain features disabled in the free mode (such as the full documenting of substitution groups).
  • To select only the initial, imported, included, redefined XML schemas to be documented or only those directly specified by name.
  • To include only XML schema components specified by name.
  • To document local element components both globally and locally (similar to attributes).
  • To allow/suppress unification of local elements by type.
  • To enable/disable reproducing of namespace prefixes.
  • To use PlainDoc.tpl main template to generate all the XML schema documentation in a signle-file form as both HTML and incredible quality RTF output.
  • To format your annotations with XHTML tags and reproduce that formatting both in HTML and RTF output.
  • To insert images in your annotations using XHTML <img> tags (supported both in HTML and RTF output).
  • To remove this very advertisement text!
Once having only such a license, you will be able to run the fully-featured XML schema documentation generator both with DocFlex/XML (Full Edition) and with DocFlex/XML RE, which is a reduced free edition containing only the template interpretor / output generator. No other licenses will be required!
But this is not all. In addition to it, a commercial license for "DocFlex/XML SDK" will allow you to modify the XSDDoc templates themselves as much as you want. You will be able to achieve whatever was impossible to do with the template parameters only. And, of course, you could develop any template applications by your own!
Please note that by purchasing a license for this software, you not only acquire a useful tool, you will also make an important investment in its future development, the results of which you could enjoy later by yourself. Every single your purchase matters and makes a difference for us!
To purchase a license, please follow this link: http://www.filigris.com/shop/